Return to Homepage

Solvent Thinned Solid Film Lubricants

Molybdenum Disulfide....
High performance for all industrial applications. Formulated for aerospace and military use

9A - Heat Curing - Longest wearing, optimum chemical and fluid resistance over all metals with excellent corrosion protection over pretreated metal.

LC-300 - Heat Curing - Use where bake schedule of 9A would be detrimental to parts. Long wear life and excellent chemical/fluid resistance over all metals and excellent corrosion protection over treated metal.

27A - Air Drying - Use for field touch up and where parts cannot be subjected to bake schedules of 9A, 103 or LC-300. Good chemical and fluid resistance. Excellent corrosion protection over all metals.

28A - Air Drying - Free of toxic heavy metals. Use in place of either 27A or 238 for field touch up and where parts cannot be subjected to bake schedules of 9A, 103 or LC-300. Moderate wear, chemical/fluid resistance and corrosion protection. 

238 - Air Drying - Use for field touch up and where parts cannot be subjected to bake schedules of 9A, 103 or LC-300. Moderate wear, chemical/fluid resistance and corrosion protection.

Poxylube® #420 - Air Drying - Graphite modification provides moderate wear and high load carrying pressures.

Hi-T 650 - Air Drying or Heat Curing - Especially good for anti-galling and anti-fretting applications. Silicone-based resin withstands sustained temperatures of 750 o F - 800 o F with intermittent temps up to 1200 o F.

103 - Heat Curing - Combination of PTFE and molybdenum disulfide gives unique wear properties to 103. 103 has exceptional chemical/fluid resistance and corrosion protection over all metals.

PTFE....  
Unique Chemistry - Long Wear Life under Light Loads

Poxylube® CP-200 - Air Drying - Clear dry film clings to metal with minimal surface preparation. Dries almost instantly.

Poxylube® #800 - Heat Curing - Excellent corrosion protection and chemical/fluid resistance.

Poxylube® #820 - Air Drying - Good corrosion protection and chemical/fluid resistance with convenience of air drying.

SPECIALTY COATINGS....
Non-Lubricating type designed for aerospace and military uses. Single component coatings designed to provide exceptional corrosion protection and chemical/fluid resistance.

26AV-10 - Air Drying Epoxy

9AV-35 Mod 1 - Heat Curing Epoxy Phenolic

#8558 - Aluminum Finish Baking Kit
For assistance with Sandstrom Solid Film Lubricants call Jeri Mead at 1-803-419-2189.
To place orders for Sandstrom Solid Film Lubricants call Susan Mikles at 1-309-523-2121 ext. 361.
For MSDS's contact Sue Black at 1-309-523-2121 ext. 322. 		   

Copyright © 1998-2008  Sandstrom Products Company. Port Byron, IL 61275. All rights reserved.


 Designed and maintained by J & R Enterprises