General Industrial & OEM Product Finishes
Questions? Call Bob at 1-309-523-2121 ext. 307.
HIGH PERFORMANCE CONTACT ADHESIVE:
B200-E00 (and higher viscosity B202-E00) - Near Zero VOC (0.002 pounds per gallon) waterborne Neoprene
(Polychloroprene)
adhesive. Apply by roller, curtain coat, trowel, or spray.
B200 is designed for
for metal door construction, metal to paper gaskets, and other demanding applications.
UV
CURABLE COATINGS
We manufacture a complete line of epoxy and acrylate 100% solids and low-VOC waterborne UV curable coatings for plastic tubes,
general plastic surfaces, interior metal, wood, paper, and rubber
materials.
AQUA-POXY®
912 PRIMER
Waterborne
two-component fast dry epoxy primer with great adhesion to metal.
Universal application over metal, concrete and extruded and pultruded
plastics. Recommended DFT is 0.4-0.8 mils on
aluminum, 4 mils on exterior exposure steel and 2.5 mils on interior
exposure steel. Aqua-Poxy is recommended for ambient cure systems.
FEVER™ Unrivaled
exterior performance in a long life paint. FEVER is based on
two-component fluoropolymer technology. No baking is necessary.
Available in gloss, satin, and matte finishes. Applied properly as a
clear or as a solid color, FEVER’s protective properties will
maintain its appearance outdoors for up to fifty years depending on the
color, gloss and physical location. Matte FEVER
is impeccable for application over many exterior substrates and
structures due to its 20 year life (FEVER clear at 14,000 hours QUV
using UVA-340 bulbs has less than 10% gloss loss!). Not all colors or
gloss levels perform equally. However, ALL FEVER products greatly exceed the performance of any acrylic or polyester urethane. Made to order.
GLAZON®
542 Clear MATTE LACQUER
This HAPS free solvent borne
lacquer is designed for use on plaster and concrete figurines, statues
and sound concrete structures. For best results over new substrate apply
one or two coats of our zero VOC Clear
Water Sealer #20 before
applying the lacquer. Your work will look great for decades when the
two products are used as recommended.
GASKET COATINGS AND ADHESIVES
Sandstrom products a wide variety of gasket coatings and adhesives for
automotive and marine gasket use. Substrates are head, transmission,
carburetor, and other type gaskets. Our coatings are designed for
paper, stainless steel, graphite paper, rubber/cork hybrid and others.
Our gasket adhesives are designed to be directly applied or B staged
and are engineered to laminate paper to metal, even through oily metal.
Please contact us with your specific needs.
SANCRYL™
WATERBORNE ACRYLIC ENAMELS are
available in LOW GLOSS, SEMI-GLOSS, and FULL GLOSS
air dry finish coatings. SANCRYL™ waterborne coatings are low VOC
and cure to a tough durable finish with excellent resistance to UV
radiation. Exterior coating life is about 10 years. SANCRYL™ 300 ANSI
GRAY #70 SHOULD LAST 20 YEARS. SANCRYL™ coatings are designed for
scoreboards and signs, and as a cost effective, safe urethane
replacement. For best results Aqua-Poxy® 914 primer or
Sancryl™ 610 primer may be needed. Made to order. Sancryl™ 300 is well suited for use on wind turbine blades.
SANCRYL™ ACRYLIC LACQUERS
Sancryl™
Series A520 lacquers are HAPS free solvent reduced products that dry to
a tough durable finish with excellent resistance to UV radiation.
Exterior coating life is 5 years (bright red, orange, purple, and other
bright organic colors) up to to 10 years (black, gray and white).
Sancryl™ lacquer coatings are excellent for finishing scoreboards
and signs, and as a urethane replacement. Made to order.
SILVER
LINING® A
low VOC waterborne EMI/RFI shield coating. Two mils, applied in one
coat due to 60% volume solids, has a conductivity of less than 0.45
ohms/square cm. Adheres to most plastics. Used on military satellite
dishes, reflectors, the aerospace industry, and by hobbyists.
Sound Deadener
Designed for use on truck cab liners and for quieting noisy
environments. Need some additional sound deadening properties?
This is the product to try. Latex based. Low in cost, high in
performance. Made to order in drum or truckload quantities.
Touchup Lacquer
Our touchup lacquer was designed as a powder touchup lacquer for use by
freezer and refrigerator manufacturers. FDA approvable. Made to
order. Available in pails, gallon cans, and valve action touchup
markers. Superb adhesion properties.
LIQUID URETHANE
COATINGS:
PoxyluBE® 303
is a very high performance waterborne
2-component urethane finish specially formulated for maximum wear
and abrasion resistance. Poxylube® 303 is produced in low gloss black or
clear and is made to order. Custom colors can be produced. Contact
Bob at
1-309-523-2121 ext. 307.
Poxylube® 300
is a very high gloss waterborne clear 2-component urethane with superb adhesion to polished stainless
steel and most surfaces, coated or otherwise.
Excellent as a very long life clear
topcoat for Silver Lining®.
2.8 VOC
PLEXON® Also
available with a slightly higher VOC of 3.2 for uses where heat is not
available to thin during spray application. This is one tough high
performance full gloss urethane finish that will last about 10 years
outdoors. Some end uses are existing building panels, storage tanks,
water towers, hopper cars, structural steel, truck and automotive
surfaces, pultrusions and any other surface that requires a long usable
life with good appearance. Steel surfaces require a high quality 2-part
epoxy primer for maximum corrosion protection. Made to order.
SOLID
FILM LUBRICANT FOR COATING USE:
Poxylube®
#859 Superior mar resistance in a bake solid film lubricant.
* Heat Curing
* Mar and scratch resistant.
* Resists corrosion, fretting, solvents, acids, oils and degreasers
* Works synergistically with oils, where specified, to provide far
longer working life than with oil alone. Slate Gray color only.
For more information on our General Industrial Coatings, or to request a sample, please call 309-523-2121 and ask for Bob.